Heavy Duty Steel Blade
For decades, the Arctic HD-S has been the reason Canadians have found a parking spot. This go-to plow for commercial applications is constructed of 10 gauge hot rolled steel and is reinforced with seven integrated vertical ribs for tremendous structural strength. The snow roll blade design not only reduces wear and increases fuel efficiency - it also prevents over-the-top snow loss without a snow deflector. Built for full-size vehicles and larger.
6” Curved Deflector
Rolls the snow nicely, keeps it down on the blade and away from the vehicle's windshield.
7 Laser Cut Steel Reinforcing Ribs
For enhanced structural strength
Quik*Link® IV Attachment
Easily locks the blade, power angling and lift frame assembly to mounting kit assembly on vehicle using spring loaded handle.
Hot-Dipped Galvanized Steel Frame
Provides added resistance to abrasion, water and rust, making our plows virtually maintenance free.
Dish-Shaped Skid Shoes
Improve surface clearance while plowing forward.
Fully Reversible Hardened, High Carbon Steel Cutting Edge
Lowers blade profile by exposing only 2" of blade at a time, and can be easily flipped when worn to start with a new edge
Keep the blade upright and offer ample room for addition of a shock absorber kit, if desired
Three 3/4 Pins
Secure the Blade to the Quadrant and A frame assembly, eliminating pin seizure and easing pin replacement
|Blade Skin||10 Ga Steel||10 Ga Steel||10 Ga Steel|
|Lift Cylinder||1 1/2" x 6"||1 1/2" x 6"||1 1/2" x 6"|
|Angling Cylinder||1 1/2" x 10"||1 1/2" x 10"||1 1/2" x 10"|
|Plowing width at full blade angle||78"||83"||88"|
|Approximate weight||630 lbs||681 lbs||708 lbs|
|Cutting Edge||1/2" x 6" Steel||1/2" x 6" Steel||1/2" x 6" Steel|
|Mounting Type||Quik Link IV - Detachable||Quik Link IV - Detachable||Quik Link IV - Detachable|
Approximate weight does not include vehicle mounting kit.
The curb guard protects the edge of your plow against wear. It fits all sizes of blades. The curb guard is bolted to the first two cutting edge bolts.
Galvanized Shock Absorber kit
It is designed to reduce the return shock when plow has been tripped forwards. It fits on all commercial steel and poly full trip blades.
Poly Cutting Edge
Part# 53688-84-B (for 84" blade), Part# 53688-B (for 90" blade), Part# 52421-N (for 90" & 96" HD blade), Part# 52422-N (for 102" & 108" blade)
Pro Wings for Steel blade
Pro-Wings provide an additional 20” of blade width with a minimal increase in plow weight. Increase performance of your plow by controlling spill off. Wings will capture and hold more snow per pass resulting in quicker clean up and less passes. The extensions fit most pickup-mounted snowplows (Part# PW22)