Our superior sanding and salting solutions are now even better. Arctic's newest spreaders are engineered with two things in mind: ease and durability. Our spreaders and sanders are easy to operate and maintain, and offer an all-new level of toughness, courtesy of our innovative galvanized coating.
Your choice of gas or hydraulic drive, or 12 volt electric motor drive.
Available in four sizes: 4', 6', 8' and 10'.
Dual Motor for Electric Sander
AGE Dual Option with variable speed controller. Includes second motor for independent operation of spinner & drag chain to better control the flow of the material.
Easily Accessible Hood
Supported by two chains, this hood protects all the electrical connection, motors, chain, belts.
Flow Gate for Galvanized Sander
Operated by a handle, regulating the amount of salt coming out of the sander to spinner
Grease-able Chain Tightner
Allows easy outside access to tighten up the chain when needed
Screen for Galvanized Sander
Top screens keep out large lumps of frozen product to avoid any jam up in the feeder chain at the bottom of the hopper
Two bearings installed to supports the shaft
|Length Overall||70 3/8"||94 3/8"||118 3/8"||142 3/8"|
|Capacity*||0.8 cubic yards||1.22 cubic yard||1.64 cubic yard||2.07 cubic yard|
|Capacity with Sideboards*||1.02 cubic yard||1.45 cubic yard||1.96 cubic yard||2.7 cubic yard|
|Weight AG (Gas)||647 lbs||775 lbs||903 lbs||1006 lbs|
|Weight AGH (Hydraulic)||-||621 lbs||751 lbs||854 lbs|
|Weight AGE (Electric)||634 lbs||760 lbs||881 lbs||991 lbs|
* Water level using 2"x 4" Nominal Board Size
90290-80-H - Small Vibrator for Hitch Mount Salter
90291-200-M Large Vibrator for Galvanized Sander
Extensions for Galvanized Sander
Bolt on these extension plates for gaining extra height on your sander. Add desired boards on each side.
Inverted V for Galvanized Sanders
Bolt the Inverted V kit on your Sander using height adjuster plate and fasteners, directs the salt/sand towards the flow gate by keeping the desired tension on chain