Heavy Duty Poly Blade

Built for full-size vehicles, the Arctic Heavy Duty Poly is the workhorse of the fleet. This popular plow, like all of our poly plows, uses a combination of slick polyethylene skin and advanced blade design mechanics to initiate a rolling motion that throws even the stickiest, wettest snow faster and further. Decreased resistance means less wear on your vehicle's power train and increased fuel economy.



1/2" x 6" Cutting Edge

With top hole bolt pattern

Poly Moldboard
3/8” Polyethylene Moldboard

Throws snow further and faster resulting in less resistance and vehicle wear, and  improved fuel economy.

4 tensional springs
4 Tension Springs

Keep the blade upright and offer ample room for addition of a shock absorber kit, if desired.

6” Curved Deflector

Rolls the snow nicely, keeps it down on the blade and away from the vehicle's windshield.

7 Laser-Cut, Steel Reinforcing Ribs

Back our frictionless poly moldboard with the strength of steel.

QLIV Attachment
Quik*Link® IV Attachment

Easily locks the blade, power angling and lift frame assembly to mounting kit assembly on vehicle using spring loaded handle.

Additional Reinforcements
Additional Horizontal Reinforcement for HDXL Blade

From 3 steel support structures that run the width of the moldboard.

Galvanized Steel frame
Hot-Dipped Galvanized Steel Frame

Provides added resistance to abrasion,  water and rust, making our plows virtually maintenance free.

Double lift chains
Double lift chains for HDXL Plow

For Extra lift, strength and safety

Disc Shaped Skid Shoes
Dish-Shaped Skid Shoes

Improve surface clearance while plowing forward.

Three 3/4” Open Pins

Secure the blade to the quadrant and A-frame assembly, eliminating pin seizure, and easing pin replacement.


Plow Model 90P 96P 102P 108P
Blade Length 90" 96" 102" 108"
Blade Height 29" 29" 29" 29"
Blade Skin 3/8" Poly 3/8" Poly 3/8" Poly 3/8" Poly
Trip Springs 4 4 4 4
Reinforced Ribs 7 7 7 7
Lift Cylinder 1 1/2" x 6" 1 1/2" x 6" 2" x 6" 2" x 6"
Angling Cylinder 1 1/2" x 10" 1 1/2" x 10" 1 1/2" x 10" 1 1/2" x 10"
Plowing width at full blade angle 78" 83" 88" 94"
Approximate weight 674 lbs 691 lbs 776 lbs 788 lbs
Cutting Edge 1/2" x 6" Steel 1/2" x 6" Steel 1/2" x 6" Steel 1/2" x 6" Steel
Mounting Type Quik Link IV - Detachable Quik Link IV - Detachable Quik Link IV - Detachable Quik Link IV - Detachable

Approximate weight does not include vehicle mounting kit

Does this snowplow Fit My Vehicle? Which Plow is for you

Recommended Accessories

Curb Guard
Curb Guard

The curb guard protects the edge of your plow against wear. It fits all sizes of blades. The curb guard is bolted to the first two cutting edge bolts.

Part #
Shock Absorber
Galvanized Shock Absorber kit

It is designed to reduce the return shock when plow has been tripped forwards. It fits on all commercial steel and poly full trip blades.

Part #
Poly Cutting Edge
Poly Cutting Edge

Part# 53688-84-B (for 84" blade), Part# 53688-B (for 90" blade), Part# 52421-N (for 90" & 96" HD blade), Part# 52422-N (for 102" & 108" blade)

Pro Wings
Pro Wings for Poly Blade

Pro-Wings provide an additional 20” of blade width with a minimal increase in plow weight. Increase performance of your plow by controlling spill off. Wings will capture and hold more snow per pass resulting in quicker clean up and less passes. The extensions fit most pickup-mounted snowplows. (Part # PW22) 


Arctic Heavy Duty Poly Blade

Printer-friendly version and information on Arctic Heavy Duty Poly Blade