Galvanized Spreader

Galvanized Spreaders

Our superior sanding and salting solutions are now even better. Arctic's newest spreaders are engineered with two things in mind: ease and durability. Our spreaders and sanders are easy to operate and maintain, and offer an all-new level of toughness, courtesy of our innovative galvanized coating. 

Your choice of gas or hydraulic drive, or 12 volt electric motor drive.

Available in four sizes: 4', 6', 8' and 10'.

Features

Sander hood
Easily Accessible Hood

Supported by two chains, this hood protects all the electrical connection, motors, chain, belts.

Electric Dual motor
Dual Motor for Electric Sander

AGE Dual Option with variable speed controller. Includes second motor for independent operation of spinner & drag chain to better control the flow of the material.

Galvanized Sander Screen
Screen for Galvanized Sander

Top screens keep out large lumps of frozen product to avoid any jam up in the feeder chain at the bottom of the hopper

Flow Gate Regulator
Flow Gate for Galvanized Sander

Operated by a handle, regulating the amount of salt coming out of the sander to spinner

Greasable Chain Tightner
Grease-able Chain Tightner

Allows easy outside access to tighten up the chain when needed

Bearings
Supportive Bearings

Two bearings installed to supports the shaft

Specifications

Model AG4/E AG6/H/E AG8/H/E AG10/H/E
Model Size 4' 6' 8' 10'
Length Inside 47" 71" 95" 119"
Length Overall 70 3/8" 94 3/8" 118 3/8" 142 3/8"
Width 50" 50" 50" 50"
Body Height 32" 32" 32" 32"
Capacity* 0.8 cubic yards 1.22 cubic yard 1.64 cubic yard 2.07 cubic yard
Capacity with Sideboards* 1.02 cubic yard 1.45 cubic yard 1.96 cubic yard 2.7 cubic yard
Weight AG (Gas) - 775 lbs 903 lbs 1006 lbs
Weight AGH (Hydraulic) - 621 lbs 751 lbs 854 lbs
Weight AGE (Electric) 634 lbs 760 lbs 881 lbs 991 lbs

* Water level using 2"x 4" Nominal Board Size

Recommended Accessories

Vibrator
Vibrator kit

90290-80-H - Small Vibrator for Hitch Mount Salter

90291-200-M Large Vibrator for Galvanized Sander

Extensions for Galvanized Sander
Extensions for Galvanized Sander

Bolt on these extension plates for gaining extra height on your sander. Add desired boards on each side.

Part #
90136-M
Inverted V for Galvanized Sander
Inverted V for Galvanized Sanders

Bolt the Inverted V kit on your Sander using height adjuster plate and fasteners, directs the salt/sand towards the flow gate by keeping the desired tension on chain

Part #
90251-M
LED Work light
LED Work Light for Sanders
Part #
90315-M

Literature

Image
Spreader
Arctic Spreaders

Printer-friendly version and information