Extra Heavy Duty Poly Blade
Thirty-three inches high at the moldboard and 10' across, the Arctic Extra Heavy Duty Poly is a step-up from the Arctic HD-P and Arctic HDXL-P models. Eight vertical ribs, a 50" double plate, reinforced quadrant and frame combination, and the slick poly blade means that you - not Mother Nature - decide where winter is going to be.
1/2" x 6" Cutting Edge
With top hole bolt pattern
3/8” Polyethylene Moldboard
Throws snow further and faster resulting in less resistance and vehicle wear, and improved fuel economy.
50" Double Plate Reinforced Quadrant
50" Double Plate Reinforced Quad and 1/4" x 2 1/2" x 2 1/2" A frame with 1" greaseable king bolt gives this plow tremendous strength
6 Tension Springs
Keep the blade upright and offer ample room for addition of a shock absorber kit, if desired
6” Curved Deflector
Rolls the snow nicely, keeps it down on the blade and away from the vehicle's windshield.
8 Laser-Cut Steel Reinforcing ribs
Back our friction-less poly moldboard
Quik*Link® III Attachment
Easily locks the blade, power angling and lift frame assembly to mounting kit assembly on vehicle using two 1"pins on both sides
Hot-Dipped Galvanized Steel Frame
Provides added resistance to abrasion, water and rust, making our plows virtually maintenance free.
Double lift chains
For Extra lift, strength and safety
Dish-Shaped Skid Shoes
Improve surface clearance while plowing forward.
|Blade Skin||3/8" Poly|
|Lift Cylinder||2" x 6"|
|Angling Cylinder||2" x 16"|
|Plowing width at full blade angle||104"|
|Approximate weight||1126 lbs|
|Cutting Edge||1/2" x 6" Steel|
|Mounting Type||Quik Link III - Detachable|
Approximate weight does not include vehicle mounting kit.
Galvanized Shock Absorber kit
It is designed to reduce the return shock when plow has been tripped forwards. It fits on all commercial steel and poly full trip blades.