Heavy Duty Extra Long Poly Blade

Built for full-size heavier vehicles, the Arctic HDXL-P offers all the same great features as the Arctic HD-P in a wider, heavier package. In addition to the slick polyethylene skin, open pins, and a hardened, high-carbon cutting edge, the Arctic HDXL-P is reinforced with a horizontal steel support. It's the workhorse of our fleet, with extra armor.


Steel Cutting Edge
1/2" x 6" High Carbon Steel Cutting Edge

With top hole bolt pattern

Poly Moldboard
3/8” Polyethylene Moldboard

Throws snow further and faster resulting in less resistance and vehicle wear, and  improved fuel economy.

4 tensional springs
4 Tension Springs

Keep the blade upright and offer ample room for addition of a shock absorber kit, if desired.

6” Curved Deflector

Rolls the snow nicely, keeps it down on the blade and away from the vehicle's windshield.

7 Laser-Cut, Steel Reinforcing Ribs

Back our frictionless poly moldboard with the strength of steel.

QLIV Attachment
Quik*Link® IV Attachment

Easily locks the blade, power angling and lift frame assembly to mounting kit assembly on vehicle using spring loaded handle.

Reinforcing Plates
Additional Horizontal Reinforcement

From 3 steel support structures that run the width of the moldboard.

Galvanized Steel frame
Hot-Dipped Galvanized Steel Frame

Provides added resistance to abrasion,  water and rust, making our plows virtually maintenance free.

Double lift chains
Double lift chains

For Extra lift, strength and safety

Disc Shaped Skid Shoes
Dish-Shaped Skid Shoes

Improve surface clearance while plowing forward.

Three 3/4” Open Pins

Secure the blade to the quadrant and A-frame assembly, eliminating pin seizure, and easing pin replacement.


Plow Model HDXL102-P HDXL108-P
Blade Length 102" 108"
Blade Height 29 1/4" 29 1/4"
Blade Skin 3/8" Poly 3/8" Poly
Trip Springs 4 4
Reinforced Ribs 7 7
Lift Cylinder 2" x 6" 2" x 6"
Angling Cylinder 1 1/2" x 10" 1 1/2" x 10"
Plowing width at full blade angle 88" 94"
Approximate weight 776 lbs 788 lbs
Cutting Edge 1/2" x 6" Steel 1/2" x 6" Steel
Mounting Type Quik Link IV - Detachable Quik Link IV - Detachable

Approximate weight does not include vehicle mounting kit. 

Does this snowplow Fit My Vehicle? Which Plow is for you

Recommended Accessories

Curb Guard
Curb Guard

The curb guard protects the edge of your plow against wear. It fits all sizes of blades. The curb guard is bolted to the first two cutting edge bolts.

Part #
Shock Absorber
Galvanized Shock Absorber kit

It is designed to reduce the return shock when plow has been tripped forwards. It fits on all commercial steel and poly full trip blades.

Part #
Poly Cutting Edge
Poly Cutting Edge

Part# 53688-84-B (for 84" blade), Part# 53688-B (for 90" blade), Part# 52421-N (for 90" & 96" HD blade), Part# 52422-N (for 102" & 108" blade)

Pro Wings
Pro Wings for Poly Blade

Pro-Wings provide an additional 20” of blade width with a minimal increase in plow weight. Increase performance of your plow by controlling spill off. Wings will capture and hold more snow per pass resulting in quicker clean up and less passes. The extensions fit most pickup-mounted snowplows. (Part # PW22) 


Arctic Heavy Duty Extra Long Poly Blade

Printer friendly version and information on Arctic HDXL-P.